Investment Advice for Cyclists and Triathletes!

By: Hunter Allen

First you start out “wide-eyed and bushy tailed”, excited for everything and everyone related to cycling.  It’s a great time when you are absorbing as much knowledge as you can, getting stronger, ripping through every cycling magazine and website memorizing all the names of the riders, and generally throwing yourself into the sport.  After this phase wears off, you continue to learn, but in a way that makes you wiser now, the “wise” phase.  You are learning from your mistakes made in training, mistakes in races and as you learn, you become more successful.  This second step is an important one because it causes an upward spiral of success, happiness and adds to the whole “fun quotient” of cycling in general.  At the start of the next phase, the “serious” phase, you are still improving but at a slower rate now.  You are continuing to get wiser and ride smarter saving precious energy to keep those legs fresh for the end of the ride.  This phase lasts a disproportionately long period of time because the gains are slower, the desire is still high and you are now trying harder than ever.  Eventually though, you reach a place when you are not able to improve and you begin to stagnate.  This next phase or evolution of training is one in which you begin thinking about all the smaller ways you can improve and that idea of “the accretion of incremental marginal gains” begins to run through your mind.  Can I buy a little faster wheels?  Can I train a little smarter?  Do I get a coach?  Maybe if I used my Power meter more effectively?   This phase is what I call the “Dedicated” phase.  You are dedicated to your hobby, sport and for some of you, your profession.    It could move onto the next phase, which is called the “monk” phase, where you do nothing but ride bicycles and eat special food, do special training, etc.  and this is the phase that all pro cyclists much reach to pass into the professional ranks.  There are other phases after this of course, but for this article we are going to focus on the “Dedicated” phase.   Going through to the next phase is not something that is a discrete, door opening experience, and it’s generally a slow change over time from one way of being/thinking to another.   

In this “Dedicated” phase of cycling, this idea of smaller improvements dominant the thinking and actions.  Improving your nutrition and its corollary, losing weight, always seems to be close to the top.  From there we move onto harder training and smarter training, generally in that order because you first train harder and then you get smarter, learning that harder training only works at the right times.   The next step is you begin learning about the power of the mind, positive self-talk and improving your mental game.    There are many more steps that you take in this “Dedicated” phase but let’s focus on the “smarter training” one in this article. 

Smarter training does not mean less training and it does not mean more training.  Smarter training means training more efficiently.  It means training the correct physiological energy systems at the time they need to be trained and for the right amount of time so that they give you the greatest adaptation/improvement.  Training smarter does not always mean training only when you get the highest benefit for cost, as many of the strategies of training require a large investment with a small return.  It is often the case, that the smallest of improvements are the improvements that make the difference between winning and getting dropped, and those smallest of small improvements take a large investment of time and hard work.

Smart Training Investment #1

Each week, you should do a workout that I affectionately call, “Intervals to Exhaustion” (ITE).   ITE intervals are the epitome of effectively using your power meter for smart training.  Pick an energy system you want to train on that day, and then train it until you can train it no more.  ITE is based on your average watts from the third interval and typically you will stop the interval session when your power drops off about 5-12% (depending on the length of the interval) from the average watts in that third interval.  See Table 1 for a guideline on when to stop doing intervals. Check out Dr. Coggan’s and my book, “Training and Racing with a Power Meter” for a more in depth discussion on ITE. To increase your fitness, you have to push yourself a little farther than before in your interval repeat sessions.  If you normally do five intervals, then using the ITE concept can help give you the confidence you need to keep doing more intervals until they aren’t being effective anymore.  Who knows?  Should you do six repeats?  Ten repeats?  Four?  With a power meter and using this concept, you can easily determine the exact optimal number of repeats needed for maximum training adaptation and time efficiency.  Smart training.

Smart Training Investment #2

Cut out the “Fluff” in your workouts and in your week.  When you are focused on training hard and really going for it that week or workout, then cut down the warm-up time, time between intervals sets (not intervals, but sets of intervals) and get rid of the endurance paced riding.  The workout becomes shorter, more focused and efficient.   Here’s an example of a workout with the “fluff” and then without the “fluff”.

Threshold power and Anaerobic Attacks:

WU: (warm-up) 15 minute- endurance pace and do 4 x1 minute fast pedaling intervals –cadence over 120rpm. Rest for 1 minute between each.

Then MS: (main set) 4 x 10minutes at 200-210 watts, 100- 105% of FTP. Nail these and do your best. Rest for 5 minutes between each.

Do these at a faster than normal cadence- by 5 rpm! So, legs should be burning a bit just from the spinning faster. Then 20 minutes at endurance pace- 150-180 watts.

Then do 10 x 1 minutes all out- Attack these like you are in a race and you are attacking to get away! Do your best to average 150% of your FTP for the minute- 300watts or greater.

Hammer and push it with 3 minute between each.

CD (cool-down) Head home 20 minutes.

Total time: 2 hours 43 minutes.

Now, the same workout without the Fluff.

Threshold power and Anaerobic Attacks:

WU: (warm-up) 10 minute- endurance pace and do 4 x1 minute fast pedaling intervals –cadence over 120rpm. Rest for 1 minute between each.

Then MS: (main set) 4 x 10minutes at 200-210 watts, 100- 105% of FTP. Nail these and do your best. Rest for 3 minutes between each.

Do these at a faster than normal cadence- by 5 rpm! So, legs should be burning a bit just from the spinning faster.

Then do 10 x 1 minutes all out- Attack these like you are in a race and you are attacking to get away! Do your best to average 150% of your FTP for the minute- 300watts or greater.

Hammer and push it with 2 minute between each.

CD (cool-down) Head home 10 minutes.

Total time: 1 hour 50 minutes.

That’s a time savings of 57 minutes!

Smart Training Investment #3

Forget the easy days. You are on a time schedule and have no time for ‘putting’ around spinning the legs in active recovery. This is a waste of your time.  Instead of doing easy rides, just sleep or rest, do a yoga class or get a massage. Forget the easy days as they are not really helping you to improve your fitness and while active recovery does have some benefits in helping you to recover more quickly for the next workout, you need to just fully rest one day a week and do nothing. That is a more effective use of your limited time, plus it allows you to catch up around the house on those things that need to be done.

Smart Training Investment #4

Learn how to analyze the periodic charts in TrainingPeaks WKO software.  The periodic charts are the charts that allow you to see your changes in fitness over a time period.   These include the Mean Maximal Power Chart (Figure 1), the Performance Manager Chart (Figure 2) and the Training Stress Score by week (Figure 3) charts.   The Mean Maximal Power chart graphs your ‘bests’ or ‘peaks’ for whichever time period you decide to plot.  This defaults at 5 seconds (Neuromuscular Power), 1 minute(Anaerobic Capacity), 5 minutes(Vo2 Max), 20 minutes(close proxy of functional threshold power),  so that these default time periods will easily tell the user which energy system is on the upswing and which is on the downswing and this will help the user to make the correct decision on current training to impact future fitness.   The Performance Manager chart teaches you the dose and response relationship between work and fitness, by clearly quantifying the level of your accumulated training stress and showing you the best wattages you produce as a result of that training stress.  The peak wattages always trail training stress, since it’s the training stress that causes adaptation and improvement.   The Performance Manager is one of the most useful charts that a smart ‘trainer’ should invest in understanding.   The Training Stress Score chart is an important chart as well and something that you should look at on a regular basis to get a clear understanding of how many TSS per week you can handle, what your rest weeks look like and what are the maximum TSS points you can score in a week.  While this is not earth shattering  in terms of analysis, it does give you  perspective and sometimes having perspective makes you smarter and wiser.

The different phases that we go through in cycling are always interesting, exciting and motivating.  We learn something at each phase and those key understandings are what allow us to move to the next phase in our cycling experience.  Evolution in your cycling is like how training itself has evolved. It’s grown over the years, adapted, improved, and grown some more.  I would argue this is the hallmark of success and those that are not able to follow this path, are destined to mediocrity and stagnation.  Push yourself in your adventure, open your mind to new ideas and use the most advanced tools to improve.  Remember that if you do five smaller ‘things’ to help you improve for next season, they will add up to one BIG thing and that contributes to the next level.

The 1 Minute Test. – How you should do it.

By: Hunter Allen

The FTP test has been written about by hundreds of coaches, journalists, and others since Dr. Coggan and I created the FTP testing protocol back in 2003.  It has been a constant source of amusement and bewilderment over the years to see it misinterpreted, misconstrued and wrong in many articles.  Other articles have gotten the concept correctly, which is a relief.  If you have questions on how to properly execute the FTP test, then grab a copy of our book, “Training and Racing with a Power Meter” where we detail the exact protocol. 

But, this article isn’t about FTP. It’s about the 1 minute test, which is also often done wrong, done incorrectly or not done at all.  The 1 minute test is a test of your anaerobic capacity (AC) , or your ability to do hard, hard work without using oxygen.  These are very short efforts by nature and range from 30 seconds out to 2minutes.  

Riders with a strong AC can attack very hard up a short hill, or attack with 1km to go in a race, or are good at doing hard, short efforts and recovering quickly.   Riders that do not have this ability are generally better at aerobic efforts like steady-state riding for a long time, like doing a time trial, triathlon and climbing.  There are riders that have both a strong AC and aerobic ability and these riders are a threat to win nearly any race.  These are the riders winning the very hard one day classic races and also the grand tours.  It is rare when you see a pure steady state rider win a stage in the Tour unless it’s a mountain top finish and the rider can just grind the legs off the other riders slowly and painfully.    

 What about you?  Where is your AC as it relates to the rest of your energy systems? Is it one of your strengths? Or is it one of your weaknesses that you could improve?   Knowing how much power you can put out for 1 minute will help to you to determine which races or events might be best for you,  understanding when you should attack and put your rivals in a bit of difficulty.   Understanding your 1 minute power can also help you to determine your freshness or fatigue.  Your AC is highly dependent on your current level of fatigue.  If you are really fresh, then your AC will be very high and your average watts for that 1 minute will also be high.  Conversely, if you are fatigued at the end of a hard 3 week block of training, your AC will be low and your 1 minute power will be low.    Knowing this, it is obvious when you should test your AC to achieve the highest power output…..at the end of a rest week, when you are very rested.  If you took your rest even further (haha!) and sat on the couch for a month not riding at all, then went out and did a 1 minute test, it most likely would be your highest 1 minute ever. It would hurt bad and you might puke, but it would be the highest average watts for a minute.    

How to properly test your one minute.

Since freshness is critical for your best 1 minute test then, you test it the first thing in your ride.   It’s not necessary to warm-up very much and certainly don’t do any intervals before your 1 minute.  If possible, you should do your test on a tough hill, with about a 5-9% gradient.  If it’s too steep, you’ll have a hard time turning the pedals over in the last 15 seconds, so the ideal hill actually flattens out a little bit right at the top.  I really like to find a hill where you do crest the top of it just after you finish the 1 minute, so it’s easier to recover after.   If you do not have a hill to attack, then do the test going into the wind, so you have more resistance to push against.   Before you go out to test, you will also need to adjust your “fields” in your computer head unit so that you can see:  Lap Time, 3 second Power, and cadence.  You will touch the “lap” button on your computer when you begin the test and then again when you stop, so that you can learn your average right at the finish of the test and also easily find it in the downloaded data.  AND, it’s super important that you can see your lap time, because at 37 seconds, you will swear that you had to have ridden for a minute already. If you can’t see that timer, you will stop early and then will have to wait till the next rest week before doing it again.  

Here is the exact testing protocol that you should use to crack out your best 1 minute.

Warm-up:  20 minutes of easy riding at endurance pace so that you end up close the base of your testing hill or area.  If it takes 1 hour of riding to get to your testing hill or area, I would encourage you to drive and park, so that you have only about 20-30minutes of riding to do before the test.  Just an hour of riding could impact your wattage average.   This should be no more than 70% of your threshold power (FTP) . Keep cadence between 85-95 and the pressure on the pedals light.  Now,  do (3) x 1 minute fast pedaling drills, where you keep the wattage at 70% of FTP or lower, and just increase your cadence to 110-120rpm for a minute and then ride at 80 rpm for a minute.  It is VERY IMPORTANT your watts stay below 70% of FTP.  This is about spinning the legs, and keeping the watts low.  Do NOT blow your 1 minute test by putting out too much power here.

Main Set:  Now, you are ready for the 1 minute test.   But, guess what???  The test is actually going to be 1 minute and 5 seconds!  Yes, you will need to test for 1 minute 5 seconds, so that you capture your very best 1 minute.  When you start, you aren’t able to touch the “lap” button on your computer head unit and accelerate out of the saddle at the same time, so by doing the test for 1 minute 5 seconds, you’ll be able capture the very best 1 minute of wattage output.     

When you start, most likely you will be in your big chain ring (I recommend it).  Jump out of the saddle hard and sprint for 15 seconds, then back in the saddle and hammer for another 15-20seconds giving it your best.  It is VERY critical that you go ALL-OUT for the first 30-40 seconds of the test and then just die a thousand deaths in the last 20 seconds.   The last 20 seconds should feel like it is taking 5 minutes and you are pedaling in squares and barely moving.  I promise, you won’t be going that slow and your watts will still be pretty high.   To produce the highest average wattage for 1 minute though, you need to absolutely KILL IT in the first 30-40 seconds.   There is no holding back.  There is no thinking that you’ll go harder in the last 10 seconds.  You are going to be blown no matter what and the majority of your anaerobic capacity system is used in the first 30 seconds, so it’s better to completely exhaust that AC system with a max effort right in the beginning.

After your 1 minute, continue for the rest of your workout.   This is probably a good day to also do the other durations in the “Power Profiling tests”: 5 second sprint, 5minute Vo2 Max and 20 minute FTP test.  To learn the exact protocol for these, grab a copy of my and Dr. Coggan’s book, “Training and Racing with a Power Meter”. Today is a great day to do some testing and training and as Dr. Coggan says, “Training is testing and testing is training”.    Or, you might want to do a long ride with sweet spot work, or even just some great FTP intervals in the next hour of the ride.   The main thing is that you got in the correct testing of your Anaerobic Capacity and now you will know how this relates to the rest of your physiology.

Let’s examine two different tests where the first athlete did not test correctly and then the second one did.  (In both figures, the yellow line is the power output).  Our first athlete does the one minute test, but does NOT go hard enough in the first 30 seconds.  You can tell this because the last 30 seconds of the effort is a “flat” line.  This means that this rider had enough energy left to produce the same power for the last 30seconds, whereas their power should be degrading throughout the last 30 seconds. See figure 1 below.

For the second rider, this rider does the test properly, with a hard sprint out of the saddle. Notice how this rider’s power peaks and then begins falling off immediately. It continually drops off to nearly the end of the test when he musters up just a little bit more energy for a small increase in the final seconds.  This is how to properly execute your 1 minute test.  See figure 2 below.

In figure 3 below, we see another good example of a 1 minute test. This rider also starts very hard, not quite as hard as the rider in figure 2, but still a hard effort.  This riders power continues to degrade for the entire effort and he leave nothing on the table, so to speak.  Incredible effort here as well.

The 1 minute test is not an easy test and it hurts, but the great thing is that it’s over quickly!   How you do the test is critical to creating your best average watts for that minute.  It’s important that you do the test at the end of a rest week and on a steep enough hill.  Be careful about using any energy on the ride to the hill and then just slam the test right from the start.  You’ll die a thousand deaths, but at least you put out your best watts !    Be sure to test your 1 minute every 8 weeks, just like you do your FTP, as it can give you a great indicator of improvement in your Anaerobic Capacity and also tell you if you are too fatigued.  After a rest week, you should have a good test, and if you don’t then it probably means you need a couple more days of rest. I hope this helps you to learn even more about your unique abilities and the areas you should and should not train.